Panasonic KX-TD308 Conditions, Loop-CO L-CO button Single-CO S-CO button, 16DPT Overview

1.1Configuration

Line Access Buttons

The following two types of CO buttons must be used to seize an outside line when making a call.

•Loop-CO (L-CO) button

•Single-CO (S-CO) button

Conditions

•A flexible CO button can be assigned as a Line Access Button (L-CO or S-CO) in either System/Station Programming. Once a flexible CO button is assigned as a Line Access Button, it provides the line status condition by lighting patterns and color indication. Please refer to “LED Indication” in this section.

•Incoming and outgoing calls on the line are shown on the button in the following priority.

S-CO > L-CO

Loop-CO (L-CO) button

All outside lines can be assigned to a flexible CO button on a proprietary telephone. The assigned button serves as an L-CO button. An incoming call on any outside line arrives at the L-CO button, unless there is S-CO button associated with the line or unless the button is already in use. To make an outside call, you simply press the dedicated L-CO button. Pressing the L-CO button provides the same operation as dialing an automatic line access code.

Programming References

• Station Programming (Section 2)

Flexible CO Button Assignment — Loop-CO (L-CO) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Feature References

Flexible CO Buttons (Section 1.1/Configuration)

Outward Dialing, Line Access — Line Access, Automatic

1-16DPT Overview