Panasonic KX-TD308 manual Initial Setting for KX-T7200 Series, 22DPT Overview

1.1Configuration

Initial Setting for KX-T7200 Series

Display Contrast Adjustment (KX-T7230 and KX-T7235 only)

1

CONT

A Soft button and the VOLUME Control button are used to adjust the display contrast. The contrast level is indicated on the display by the number of asterisks. You can adjust the contrast level under the following conditions:

1.) When on-hook, or

2.) During an outside/intercom call.

1. Press the CONT (S1) button.

S 1

2

S 2 S 3

VOLUME

2.Press the VOLUME (UP / DOWN ) Control button.

•The display shows: <Example>

Contrast:*** (— contrast volume level 3)

When using the headset

The Panasonic Digital Super Hybrid System supports the use of a headset with a proprietary telephone (PT). When you use the headset (optional), you should switch the selection mode first. Selection is explained in the “Handset/Headset Selection” in Station Programming (Section 2).

To change to the headset mode

Press: [PROGRAM] [9] [9] [9] [2] [STORE] [PROGRAM].

Changing the ringing tone of a CO button

There are eight ringer frequencies available for each CO (Loop-CO, Single-CO) button. If you wish to change them, refer to the “Ringing Tone Selection for CO Buttons” in Station Programming (Section 2).

1-22DPT Overview