Panasonic KX-TD308 To talk to the original party while holding the third party, 50DPT Features

C

4.2DPT Features

To talk to the original party while holding the third party

1

TRANSFER

1.Press the TRANSFER button.

•You hear a confirmation tone (optional).

•If both of the other parties are extensions, the INTERCOM indicator light flashes green moderately.

To put both parties on hold

1

HOLD

1.Press the HOLD button.

•This feature is only available when at least one party is on an outside line.

Conditions

•Up to six conference calls are allowed simultaneously.

•A conference call can also be established by “Executive Busy Override” or “Privacy Release”.

•Pressing a CO button which is not in the conference, allows you to exit from the conference leaving the other two parties connected unless they are both outside lines. If the other parties are both outside lines, they will be disconnected.

•You can return to the original party before the third party answers by pressing the TRANSFER button.

•A flexible button on the KX-T7250 (no CONF button provided) can be assigned as the CONF button.

•When a two-party call is changed to a three-party call or vice versa, a confirmation tone is sent to all three parties. Eliminating the tone is programmable.

Programming References

• Station Programming (Section 2)

Flexible CO Button Assignment — Conference (CONF) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

•System Programming — Installation Manual

[990]System Additional Information, Field (13)

Feature References

Conference, Unattended

Executive Busy Override — Extension

Executive Busy Override — Outside Line

Privacy Release

4-50DPT Features