Panasonic KX-TD308 Description Selection Default Programming Conditions, Enter a telephone number

3.2 User Programming (Manager Programming)	001
System Speed Dialing Number Set

Description

Selection

Default Programming

Conditions

Used to program the System Speed Dialing numbers. These numbers are available to all extension users.

•Speed dial numbers: 00 through 99

•Telephone number: 24 digits (max.)

All speed dial numbers – Not stored

1.Enter 001.

Display: 001 SYS SPD DIAL

2.Press NEXT.

Display: SPD-Code?→

3.Enter a speed dial number.

To enter speed dial number 00, you can also press NEXT.

Display example: 00:Not Stored

4.Enter a telephone number.

To delete the current entry, press CLEAR.

To change the current entry, press CLEAR and enter the new number.

5.Press STORE.

6.To program another speed dial number, press NEXT or PREV, or SELECT and the desired speed dial number.

7.Repeat steps 4 through 6.

8.Press END.

•Each speed dial number has a maximum of 24 digits. The valid characters are 0 through 9, , and # keys, and the FLASH or FLASH/RCL, PAUSE, SECRET and – (hyphen) buttons.

–To store the flash signal, press FLASH or FLASH/RCL. Note : The stored flash will only be effective during an

established call.

(Refer to the Installation Manual, Section 3 “External Feature Access”.)

–To store a hyphen, press the “–” button.

User Programming (Manager Programming) 3-9