Panasonic KX-TD308 manual Programming Mode Display, To enter the Station Programming mode

2.1 Station Programming Instructions

Station Programming allows you, the proprietary telephone (PT) users, to program certain features from your telephone individually. To program, you need to switch your telephone to the Station Programming mode. During programming mode, your telephone is in the busy condition to outside callers. If you want to make a normal call handling operation, you must finish the programming mode.

Programming Mode Display

When you enter the Station Programming mode, the display shows the following message as the initial programming mode;

PT-PGM Mode

The display also gives you helpful or stored data information related to your programming steps. In this section, we note the display example in the programming steps, if required. You can also refer to the “Display Examples” in the Appendix (Section 8).

To enter the Station Programming mode

1 PROGRAM

2

9 9

Be sure the telephone is idle and on-hook.

1.Press the PROGRAM button.

2.Dial 99.

•If 99 is not dialed within 5 seconds of pressing the PROGRAM button, the Station Programming mode is canceled.

•The display shows:

PT-PGM Mode

(— initial programming display)

•The STORE indicator lights.

•If there is no entry within one minute, the Station Programming mode is canceled. Normal call handling resumes.

To exit the Station Programming mode

1

When the display shows the initial programming mode;

PROGRAM or

1. Press the PROGRAM button or lift the handset.

• Programming is completed and normal call handling resumes.

•If you go off-hook while programming, the mode is canceled and normal call handling resumes.

2-2 Station Programming (Personal Programming)