Tally Genicom Matrix Printer manual SET Mode Genicom, Reset Mode Genicom

Commands	Description
ESC [(p1);	RESET MODE (ANSI)
...(pn)l	Resets mode(s) set by ESC [(p1);..(pn)h.
	p	Effect

20reset auto CR on LF Example: reset auto CR on LF

	Dec 27 91 50 48 108		Hex 1B 5B 32 30 6C
ESC [>	SET MODE (GENICOM)
(p1);..(pn)h	This is an ANSI private use sequence.
	p	Effect
	1	proportional print
	2	reserved
	3	80 hex - 9B hex interpreted as C1 control codes
	4	bold mode accomplished by overstrike
	5	select character set 2
	Example: set proportional print
	Dec 27 91 62 49 104		Hex 1B 5B 3E 31 68
ESC [>	RESET MODE (GENICOM)
(p1);..(pn)l	Resets modes set by ESC [>(pn)h. See the previous command. The parameter
	definitions are the same.
	Example: reset proportional print
	Dec 27 91 62 49 108		Hex 1B 5B 3E 31 6C

7265 Programmer’s Manual	12
Copyright © 2004 TallyGenicom	Chapter 2 ANSI