Tally Genicom Matrix Printer manual Cpi, LINE/CHARACTER Spacing

Commands	Description
ESC [(p1);	LINE/CHARACTER SPACING
(p2) <SP> G	p1 = line spacing parameter p2 = character spacing parameter
	If you select doublewide printing (ESC [5m), then the printer doubles character
	spacing set by this command. If the designed pitch of the current font is 10 cpi and
	doublewide is set, then a character spacing argument of 72 results in a pitch of 5 cpi,
	at which horizontal segments of line-draw characters are contiguous.
	Example: ESC [90;60 <sp> G
	sets the vertical spacing to 8 lines per inch and the horizontal spacing to 12
	characters per inch. (720 divided by 8 = 90, and 720 divided by 12 = 60).
	Dec 27 91 52 48 59 54 48 32 71
	Hex 1B 5B 39 30 3B 36 30 20 47

p2 CPI

1206 The quick brown fox jumped

908 The quick brown fox jumped over

7210 The quick brown fox jumped over the lazy

6012 The quick brown fox jumped over the lazy dog’s back.

51	14	The quick brown fox jumped over the lazy dog’s back.
45	16	The quick brown fox jumped over the lazy dog’s back.
40	18	The quick brown fox jumped over the lazy dog’s back.
36	20	The quick brown fox jumped over the lazy dog’s back.

Figure 2-4Effects of Character Spacing Parameters

7265 Programmer’s Manual	19
Copyright © 2004 TallyGenicom	Chapter 2 ANSI