Tally Genicom Matrix Printer manual Following sequences will cancel the HMI mode

This sequence terminates previously set additional character space defined with

ESC SP.

Following sequences will cancel the HMI mode:

ESC !	print mode selection
ESC @	printer initialization
DC2	reset condensed print
DC4	reset enlarged print mode (set by <SO> or ESC <SO>)
ESC g	character density 15 cpi
ESC M	character density 12 cpi (Elite)
ESC P	character density 10 cpi (Pica)
ESC p	proportional spacing ON/OFF
ESC SP	character spacing
ESC W	continuous enlarged print mode ON/OFF
SI	condensed print ON
SO	enlarged print mode (automatically reset after one line)

Character Spacing 17