Tally Genicom Matrix Printer manual CSI 12 z CSI 13 z CSI 2 z, Ascii CSI

Double Height ON (Upper Half)

Double Height ON (Lower Half)

Double Height OFF

CSI 12 z CSI 13 z CSI 2 z

Data Structure ASCII	CSI	"1"	"2"	"z"	[C] double height ON (upper half)	➊
hex.	9B	31	32	7A
dec.	155	49	50	122
ASCII	CSI	"1"	"3"	"z"	[C] double height ON (lower half)	➊
hex.	9B	31	33	7A
dec.	155	49	51	122
ASCII	CSI	"2"	"z"		[A] double height OFF	➋
hex.	9B	32	7A
dec.	155	50	122

Description ➊ The same character must be sent to both lines to form a full character. Afterwards double height must be reset. If only a part of the line is printed double height, the posi- tioning of upper/lower half must be done by spaces. The line spacing should be set to 1⁄6 inch.

➋This sequence also resets superscript, subscript and microscript.

Note: For selection of double height together with the proportional mode or other print attributes the start of printing has to be identic for the top and bottom half.

Character Styling 29