Tally Genicom Matrix Printer manual Csi ... Sp G, Data Structure

Character Spacing

Spacing Increment (SPI)									CSI ... SP G
Data Structure	ASCII		CSI	n1	";"	n2	SP	"G"	[B] [C] set spacing increment
	hex.		9B	n1	3B	n2	20	47
	dec.		155I	n1	59	n2	32	71
Description	n1	specifies the line spacing
	n2	specifies the character spacing

The unit is expressed in decipoints or other units defined by SSU (Select Size Unit, see page 8).

For this note also the sequence “Set Line Spacing (SLS)” on page 26.

Example:		∧
CSI 120 ; 0	G
		=	6 lpi, basic cpi
CSI 90 ; 60	G	∧
		=	8 lpi, 12 cpi

The default setting of the spacing increment normally is 10 cpi.

n = 0: The distance is reset to the values set in the printer menu.

Character Spacing 15