Character Sets ESC t
Data Structure ASCII ESC "t" <d1> select character table
hex. 1B 74 <d1>
dec. 27 116 <d1>
Description Valid values:
0 ≤ d1 ≤ 3, 48 ≤ d1 ≤ 51
By means of this code sequence the upper half of character code table
(dec. 128 to dec. 255) can be selected.
default Description
d1 = 0 or 48 Character table 0 italic The Epson Standard Character
Set is selected. The upper half
contains control codes and italic
characters.
d1 = 1 or 49 Character table 1 Table 437 The Epson Graphic Character Set
is selected. The upper half
contains international and graphic
characters (see IBM Character
Set 2, from hex.A0 to hex.FF)
d1 = 2 or 50 Character table 2 DLL *) The upper half contains user-
defined characters, if created by
ESC &. When creating characters,
assign code value in the range of
0 to 127. For using add 128 to the
codes. Using of n = 2 without user-
defined characters causes same
contents of upper and lower half
of the character code table.
d1 = 3 or 5 Character table 3 Table 437 The IBM Code Page Table 437
is selected
* user defined character set
Miscellaneous 103