Tally Genicom Matrix Printer manual Exit Oversized, SET Character Size

Commands

ESC [Pv;Ph<sp>B

ESC [0

ESC [p1

Description

SET CHARACTER SIZE

Sets the expansion of oversized characters in percentage points. Pv is the vertical expansion and Ph is the horizontal expansion. The parent font is a 10-point font. Dimensions established by this sequence are stored in nonvolatile RAM while power is off.

Caution: Any text between receipt of this command and a countermanding mode selection command, either ESC [(Ps) or ESC[(Ps)t, will be printed in expanded mode. If you do not want this to happen, then you must follow this command immediately with a mode selection command.

The range of valid parameters (in the sense that a valid parameter does not abort the escape sequence) is 0 <= Pn < 32767. The printer rounds off dimension parameters as follows:

If Pn < 100, then Pn = 100

If 100 < Pn < 18700, then Pn is rounded down to the nearest 100. If Pn >= 18700, then Pn = 18700

Example - to set 20-point type at 1:1 aspect ratio: Dec 27 91 50 48 48 59 50 48 48 32 66

Hex 1B 5B 32 30 30 3B 32 30 30 20 42

EXIT OVERSIZED

Dec 27 91 48 125

Hex 1B 5B 31 7C

SET OVERSIZED p1 = 1-4

Dec 27 91 49-52 124 Hex 1B 5B 31-34 7C

7265 Programmer’s Manual	65
Copyright © 2004 TallyGenicom	Chapter 4 ANSI Oversized