Tally Genicom Matrix Printer manual CSI ... + z, CSI ... + y

Automatic Gap Adjustment (AGA)						CSI ... + z
Direct Setting of the Print Head Distance						CSI ... + y
Data Structure ASCII	CSI	n	"+"	"z"	[B]	automatic gap adjustment	➊
hex.	9B	n	2B	7A
dec.	155	n	43	122
ASCII	CSI	n	"+"	"y"	[B]	direct setting of the print head distance	➋
hex.	9B	n	2B	79
dec.	155	n	43	121

Description ➊ For the sequence CSI n + z the following parameters are available for n:

n	hex.	dec.	Adjustment (automatic)
0	30	48	automatic adjustment OFF
			(print head distance must be set at the printer)
1	31	49	automatic adjustment ON

➋For the sequence CSI n + y the following parameters are available for n:

n	hex.	dec.	Setting (direct)
0	30	48	Default value
			(is set at the printer)
n			print head distance in n -steps

Setting the print head distance accords to the respective paper path selected. Unit, adjust range and default setting depend on the device used.

If the Automatic Gap Adjustment is set to ON, the sequence ➋ is ignored.

Example:
Settings of T2060:	Unit =	10 Micrometers
	Adjust range =	1 – 100
	Default value =	18

70Miscellaneous