7265 Programmer’s Manual 25
Copyright © 2004 TallyGenicom Chapter 2 ANSI
MarginsUse the Forms Setup command, page 2-39, to set vertical m argins.
Commands Description
ESC [(p1);6 (p2)s SET LEFT AND RIGHT MARGIN
Sets the left and right margin in decipoints; p1 is the left margin and p2 is the
right. Distances are measured from the left print reference. This command
takes effect following the next line terminator (you cannot set margins for the
current line).
EXAMPLE: Set the left margin at 0.4 inch and right margin at 6.9 inches,
making a 6.5-inch print line.
Dec 27 91 50 56 56 59 52 57 54 56 115
Hex 1B 5B 32 38 38 3B 34 39 36 38 73
ESC [s ASSIGN MARGIN DEFAULTS
Assigns the default parameters. Sets the left margin to zero, right margin to
maximum print line width of the printer. This command takes effect following the
next line terminator.
Dec 27 91 115 Hex 1B 5B 73