Tally Genicom Matrix Printer manual Code 93 Style

Code 93 (Style 15)

1Bars per character: 3 dark bars and 3 light bars

2Character set: All 128 ASCII characters

3Start/Stop characters: Yes. (Stop character has 4 dark bars and 3 light bars)

4Center character code: None

5NULL character: Yes

6Intercharacter gap: No

7Characters per symbol: Variable

8Check digit: Always required. Must be generated by data source. See page 58

9Delimiters: Horizontal tab. (When no tabs are defined, a space is inserted.), hp_relative

10HR characters: Currently selected font, special HR font, special OCR-A/OCR-B font (120 DPI only)

11CPI at default element widths: 6.85

12Combined start-stop character length: 0.333"

Code 128 (Style 16)

1

2

Bars per character: 3 dark bars and 3 light bars

Character set: Any of 3 subsets. The printer automatically shifts among subsets based on the data that you send. Subset A --All standard alphanumeric keyboard characters, control characters and special characters Subset B --All standard alphanumeric keyboard characters, lower case alpha characters and special characters Subset C --Set of 100 digit pairs from 00 to 99

3	Start/Stop characters: Yes
4	Center character code: None
5	NULL character: Yes
6	Intercharacter gap: None
7	Characters per symbol: Variable
8	Check digit: Automatically generated by the printer. (Cannot be disabled.)
9	Delimiters: Horizontal tab. (When no tabs are defined, a space is inserted.),
	hp_relative
10	Automatic data compression and subset selection
11	CPI at default element widths: 11.07
12	Combined start-stop character length: 0.583"

7265 Programmer’s Manual	54
Copyright © 2004 TallyGenicom	Chapter 3 ANSI Bar Codes