Panasonic KX-TD308 manual To confirm the assigned function data

2.1 Station Programming Instructions

To confirm the assigned function data

—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1.Enter the programming access number* as follows:

1

access number

-1 : Preferred Line Assignment — Outgoing

-2 : Preferred Line Assignment — Incoming

-3 : Full One-Touch Dialing Assignment

- 4 : Intercom Alert Assignment

2- 5 : Call Waiting Tone Type Assignment

HOLD

- 6 : Self-Extension Number Confirmation

-7 : Live Call Screening Mode Set†

-81 : Initial Display Selection

-82 : Bilingual Display Selection

-9 : Handset/Headset Selection

-01 : Remote Station Lock Control (— Operator / manager only)

-02 : Call Log Lock Control, Incoming

(— Operator / manager only)

-03 : Live Call Screening Password Control† (— Operator / manager only)

-# : Station Programming Data Default Set

•The display shows the programmed data. <Example>

When you press [5], the display shows:

C.W. Tone 1

(— The Call Waiting tone is now programmed to Tone 1.)

2.Press the HOLD (END) button.

•The display shows the initial programming mode.

—To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

—If you wish to change the data, follow the programming procedure explained in this section.

*A programming access number is required to program/confirm the function data by Station Programming.

† Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports digital proprietary telephone integration; e.g. KX- TVS100).

Station Programming (Personal Programming) 2-3