Panasonic KX-TD308 manual Call Transfer using a DSS Direct Station Selection button

4.2DPT Features

C

Call Transfer using a DSS (Direct Station Selection) button

Allows you to perform a Screened or Unscreened Call Transfer by using a DSS button. There are two operations, depending on whether or not One-Touch Transfer* is set.

*One-Touch Transfer allows you to hold an outside call and transfer it to an extension by pressing one key. This feature provides automatic hold and transfer, without pressing the TRANSFER button. System Programming is required to use this function.

“One-Touch Transfer” mode enabled:

1	During a conversation;
	1. Press the desired flexible button which is assigned as the DSS
	button.
	• The other party is placed on hold and the destination
	extension is called immediately.

“One-Touch Transfer” mode disabled:

1

TRANSFER

2

During a conversation;

1.Press the TRANSFER button.

2.Press the desired flexible button which is assigned as the DSS button.

Conditions

•If you misdial, press the FLASH or FLASH/RCL button, and re-enter the number.

•If you want to return to the held call, press the TRANSFER button or corresponding CO or INTERCOM button before the destination extension answers.

•If the destination extension does not answer the call within twelve rings (default), “Transfer Recall” occurs. If the transferred call is an outside call, it is possible to select whether Transfer Recall will go to the initiating extension or to Operator 1 by System Programming.

•When “Transfer Recall” occurs, the display shows: <Example>

RCL: Ext 13

•If there is no answer for thirty minutes after “Transfer Recall” starts, the line will be disconnected.

•A flexible CO button can be assigned as a DSS button.

•To use “One-Touch Transfer”, System Programming is required.

DPT Features 4-43