Panasonic KX-TD308 Programming Methods, Advancing to the next stage, Rotation of jack number

3.1 User Programming Instructions

Programming Methods

Advancing to the next stage

When “USR-PGM NO?→” is displayed, you can select one of the following:

•To go to program [000], press the NEXT button.

•To go to another program, enter the 3-digit program address.

Rotation of jack number

Each jack of the Digital Super Hybrid System supports the connection of a digital proprietary telephone and a single line device with different extension numbers (eXtra Device Port: XDP function).

To program this function it is necessary to assign two parts for each jack. The first part of jack one is 1-1. The second part of jack one is 1-2. The first part of jack two is 2-1 and so on. The NEXT and PREV buttons can be used to move from jack to jack as required.

Example;

NEXT		NEXT			NEXT
#1-1		1-2		#2-1		#2-2
	PREV		PREV		PREV

Note:

The first part of a jack is for a DPT of a XDP-assigned jack. The second part is for a single line device. Program [600] “EXtra Device Port” assigns which jacks are XDP.

Entering Characters

You can enter characters to store names for speed dial numbers, extension numbers, etc., by using the dialing key pad and buttons.

Each of the twelve dialing keys on the dialing key pad represents seven characters. Refer to the “Station Speed Dialing Number / Name Assignment (KX-T7431/KX-T7433/KX- T7436/KX-T7235 only)” section in Section 2.2 Station Programming.

Storing your data

Press STORE to store your data.

•The STORE indicator lights red and a confirmation tone sounds.

*Confirmation tone (one beep)

After pressing STORE, you will hear a beep. This informs you that storage has been completed successfully.

*Alarm tone (three beeps)

If you hear this alarm, your entry is not valid.

User Programming (Manager Programming) 3-5