Panasonic KX-TD308 manual Programming References, 22DPT Features

C

4.2DPT Features

•A floating extension such as a DISA (Direct Inward System Access) or external pager cannot be programmed as a forwarding destination.

•Two extensions can set each other as the destination extension. In this case, an intercom call to the other party while he/she is absent will not be forwarded back to the original extension.

•Confirmation tone 2 (two beeps) is sent when the previously programmed data is same as the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the “Tone List” in the Appendix (Section 7).

•A flexible button on the KX-T7250 (no FWD/DND button provided) can be assigned as the FWD/DND button.

•You can call the original extension from the Call Forwarding destination extension. (Boss Secretary)

•Both the Call Forwarding and Do Not Disturb (DND) functions can be set at the same time, but cannot work at the same time.

•You can enable or disable the Call Forwarding or Do Not Disturb (DND) function by pressing the FWD/DND button while on-hook. If you set both Call Forwarding and DND, alternating the mode is also available by pressing the FWD/DND button. In this

case, pressing the button changes the setting as follows: the most recent setting → the other setting → off

The lighting patterns of the FWD/DND button are as follows: Off : Both functions are not set

Red : DND mode

Flashing red slowly: FWD mode

•With the KX-T7436 and KX-T7235, you can set or cancel the Call Forwarding features using the display operation.

Programming References

• Station Programming (Section 2)

Flexible CO Button Assignment — FWD/DND Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

Feature References

Call Forwarding — CANCEL

Call Forwarding / Do Not Disturb (4.4/Special Display Features)

Do Not Disturb (DND)

Voice Mail Integration

4-22DPT Features