Panasonic KX-TD308 manual One-Touch Dialing Button Assignment

2.2Station Programming (Personal Programming)

One-Touch Dialing Button (Assignment)

Allows you to assign a Flexible CO button as an One-Touch Dialing button.

1

2

—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].

1.Press the Flexible CO button you wish to assign as an One- Touch Dialing button.

2.Dial 2.

• The display shows:

2

CLR

3

desired number

3.Enter the desired number (an extension number, phone number, etc.).

•Up to 16 digits can be stored.

•To erase an incorrect entry, press the CLR (S2) button or the TRANSFER (CLEAR) button.

4

AUTO DIAL

STORE

(The TRANSFER button becomes the CLEAR button when using the

overlay.)

4.Press the STORE button.

•The STORE indicator lights.

•The display shows the initial programming mode.

— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.

Conditions

•The number can be an extension number, telephone number or a feature number. Up to sixteen digits can be stored in an One-Touch Dialing button.

•To store the telephone number of an outside party, a line access code (9 or 81 through 83) must be stored as the leading digit.

•You can store a number consisting of seventeen digits or more by dividing it and assigning it in two One-Touch Dialing buttons. In this case, the line access code should be stored in the first button.

•You can use 0 through 9, , #, PAUSE, FLASH or FLASH/RCL, CONF and INTERCOM for storing.

# : change the dialing mode (Pulse to Tone) FLASH or FLASH/RCL : hook flash

PAUSE : pause

CONF : — (hyphen)

INTERCOM : for secret dialing

KX-T7220 and KX-T7250 telephones do not have a PAUSE button. The PROGRAM button can be used instead of the PAUSE button while programming.

2-14Station Programming (Personal Programming)