Sanyo PLC-XE50 owner manual Antitheft Alarm Function, Other settings, Indicator, Terminal

Antitheft Alarm Function

Other settings

Change the PIN code

1	Press the F button and enter the four-digit PIN code
	number within about 10 seconds. The ALARM indicator
	blinks red for a few seconds and a high-pitched
	confirmation sound is produced.
2	While the indicator is blinking, enter a new PIN code,
	then you will hear a high-pitched confirmation sound

and the ALARM indicator is turned off.

When you enter an incorrect PIN code, you will hear a low-pitched sound. If you enter incorrect PIN code three times in a row, the alarm will start ringing.

The PIN code for the Antitheft alarm function is a combination of 1, 2, or 3. Use the buttons 1, 2, and 3 to enter the PIN code. The default PIN code is “1111.”

Reset the settings

Select “Factory default” in the Setting menu to reset the settings for the Antitheft alarm function.

✔Note:

•This is effective only when the Antitheft alarm setting is released.

Alarm operating configuration

The Alarm operating configuration can be changed when the Antitheft alarm function is set to “Off.” See page 53 for setting or releasing this function.

Press the SELECT button at Alarm icon in the Setting Menu to display the Alarm setting dialog box. Use the Point ed buttons to select the desired option; use the Point 7 8 buttons to set the selected option.

Battery charge

See the next page for details.

Alarm volume

Small, Medium, Large (default)

Sensitivity
Low	Less sensitive
Medium	Normal sensitivity
High	Highly sensitive (default)
Ringing time
10 seconds	Rings about 10 seconds (default).
60 seconds	Rings about 60 seconds.
Long time	Rings until the end of the battery life.

caution:

when you have changed THE PIn code, write down the new pin code in column of the pin code no.memo on page 72, and keep it securely. If you forget your PIN code, some settings of THE ANTITHEFT ALARM function can no longer be changed.

Indicator

ALARM indicator

Terminal

Button 1, 2, 3 F button

Alarm

Press the SELECT button at the Alarm icon to display the Alarm setting dialog box.

Use the Point 7 8 buttons to set the selected option.

✔Note:

•The Alarm icon appears dimmed and can be unavailable when the Antitheft alarm function is set to “On” or if the battery is not installed, discharged, or coming to the end of its life.

•While the Alarm icon is selected, the Antitheft alarm setting buttons can be unavailable.

•When selecting “Long time” option in the Ringing time, the duration of alarm sounding differs depending on the battery life.

54