1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon.
2 Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the “Filter counter Reset?” appears. Select [Yes] to continue.
3 Another confirmation dialog box appears, select [Yes] to reset the Filter counter.
Filter counter
CAUTION
Do not operate the projector with the air filter removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air intake vents. Otherwise it may result in malfunction of the projector.
5 Reinstall the filter into the projector properly.
6 Reset the filter counter in the Setting Menu. See “Resetting the Filter Counter” below.
Air filter
Pull up and remove.
1 Turn off the projector, and unplug the AC power cord from the AC outlet.
2 Turn over the projector and remove the air filter by pulling the latches upward.
3 Cleanvents.up the dust on the projector and around the air 4 Gently clean the filter by using a brush or blower.
WARNING: Do not wash the filter with water and any other liquid matter. Otherwise the filter may be damaged.
RECOMMENDATION
We recommend avoiding dusty/smoky environments when you operate the projector. Usage in these environments may cause poor image quality.
When you use the projector under dusty or smoky conditions, dust may accumulate on the lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image.
When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning.
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the filter.
Replacement Filter Part No.: 610 335 4057
✔Note:
•When cleaning the air filter, protect the infrared remote receiver with a soft cloth to avoid damaging it.
• If the filter is heavily clogged and unable to clean, replace it with a new one. Consult your dealer for details.
Maintenance and Cleaning
Cleaning the Air Filter
The air filter prevents dust from accumulating on the surface of the optical elements inside the projector. Should the air filter become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in a buildup of internal heat and adversely affects the life of the projector. Clean the air filter by following the steps below.
Select Reset and the “Filter counter Reset?” appears.
Select [Yes], then another confirmation box appears.
Select [Yes] again to reset the Filter counter.
58
