Setting
Ceiling
When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a
Rear
When this function is set to “On,” the picture is left/right reversed. This function is used to project the image to a rear projection screen.
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output (p.10). Select Computer 2 or Monitor Out with the Point 7 8 buttons.
Computer 2……computer input
Monitor Out……monitor out
Terminal function is not available when Computer 2 to the input source is selected. Change the input source to the others (Computer1 or Video) so that the Terminal function is available (pp.26,
Input search
This function detects the input signal automatically. When finding a signal, the search will stop. Use the Point 7 8 buttons to select one of the followings.
Off …… Input search does not work.
On1 …… Input search works under the situation below.
•When the COMPUTER button or VIDEO button on the remote control is pressed.
On2 …… Input search works under the situation below.
•When the projector is turned on with pressing the
•When the COMPUTER button or VIDEO button on the remote control is pressed.
•When the current input signal is missed. ✳
✳If the No show or Freeze function is active, cancel it to activate the Input search. It is not available when On‑Screen menu is displayed.
Ceiling |
Rear |
✔Note:
•While Input search is set On1 or On2, the status of Input and Lamp are displayed every time the signal is switched.
•Only the input source selected at the last time can be detected.
•If the COMPUTER/VIDEO button on the remote control is pressed while Input search is on, Input search will stop and go back to the previous input sign.
48
