Setting
Blue back
Press the Point 7 8 buttons to switch on/off. When this function is “On,” a blue image is displayed while the input signal is not detected.
Display
Press the Point 7 8 buttons to switch on/off. This function decides to display the
On …………………Display all the
Use this function when you want to project images after the lamp becomes bright enough. This mode is set as a default.
Countdown off… Display the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough.
Off…………………Do not show the
except:
●
●“Power off?”
●
●“No signal” for Power management item (p.49)
●”Please wait...”
●Arrows for panning mode (p.35)
45
