Sanyo PLC-XE50 How to Operate the On-Screen Menu, Basic Operation, Remote Control, MENU button

Basic Operation

How to Operate the On-Screen Menu

The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual.

1	Press the MENU button on the remote control to
	display the On-Screen Menu.
2	Use the Point 7 8 buttons to select a Menu icon; use
	the Point ed buttons to select an item.
3	Press the SELECT button to show the item data. To

Remote Control	MENU button
	POINT buttons

SELECT button

adjust the data, use the Point 7 8 buttons. Refer to the

relevant pages for more details about each adjustment.

To close the On-Screen Menu, press the MENU button again.

✔Note:

•The selected item is not active until the SELECT button is pressed.

On-Screen Menu

Menu bar

Pointer (red frame) Press the Point ed buttons to move the pointer.

Item

SELECT

button

Menu icon

Pointer (red frame)

Item data

Press the Point 7 8 buttons to adjust the value.

Quit

Exit this menu.

21