Sanyo PLC-XE50 owner manual Safety Instructions Air Circulation, Moving the Projector

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

–  Do not put any flammable objects or spray can near the projector. Hot air is exhausted from the air vents.

–  Keep the exhaust vent at least 3’ (1 m) away from any objects.

–  Do not touch a peripheral part of the exhaust vent, especially screws and metallic part. This area will become hot while the projector is being used.

–  Do not put anything on the projector. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fan’s running speed is changed according to the temperature inside the projector.

Exhaust Vent (Hot air exhaust)

Air Intake

Vent

Moving the Projector

When the projector is not in use for an extended period, put it into a suitable case.

Handle the projector carefully; do not drop, bump, subject it to strong forces, or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR

–  Do not drop or bump the projector, otherwise damages or malfunctions may result.

–  When carrying the projector, use a suitable carrying case.

–  Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer.

–  Do not put the projector in a case before it is cooled enough.