Samsung GH68-22573A user manual Voice Commands, VoiceSignal includes the following commands

into your phone. (Also see “Making a Call — Voice Dialing” on page 21 and “Voice Method” on page 37 for more information.)

•Voice Settings — Lets you adjust VoiceSignal to better suit your needs.

2.Select the desired sub-menu.

Voice Commands

To start VoiceSignal, do one of the following:

•In standby mode, press and hold .

“Say a Command” appears in the display and is pronounced through the earpiece, followed by a list of available commands.

•At the Tools menu, select Voice SVC ➔ Voice Command.

Note: You can also set your phone to start VoiceSignal when you open the phone. (For more information, refer to “Voice Launch” on page 95.)

VoiceSignal includes the following commands:

–Call — Lets you dial the phone by saying any name stored in your contact list, without ever having to record, or “train” that name. VoiceSignal automatically voice-activates all your contacts, even if you have hundreds of them stored on your phone. You can also dial any telephone number, even if it is not stored in your contact list, by saying the digits in the number. (For more information, refer to “Making a Call — Voice Dialing” on page 21.)

–Send Text — Lets you launch the Create Txt Msg screen. (For more information, refer to “Create and Send Text Messages” on page 50.)

–Send Picture — Lets you launch the Create Pic Msg screen. (For more information, refer to “Send Picture Messages in Standby Mode” on page 54.)

–Lookup — Lets you look up and display contact information for any name stored in your Contacts list by saying the name. (For more information, refer to “Finding a Contacts Entry” on page 37.)

–Go to — Lets you access all of the Main Menus on your phone.

–Check — Lets you check your phone's status (that is, network coverage, signal strength, and battery in the same report), network coverage, signal strength, battery, and phone number.

Note: Speaking clearly, say the command that you want to use.

If, after a few seconds, the device has not recognized a command, it prompts you to repeat the command.

If, after a few more seconds, it still has not recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition.

Voice Command Tips:

•Make sure you wait for the beep before speaking.

•Speak clearly at a normal volume, as if you were talking on the phone.

Tools 92