4.Select the desired unassigned number type. The Edit Contact screen appears in the display with the new number posted in the appropriate number type field.

5.Press again to save your changes to the existing entry.

Speed Dial

A Contacts entry’s Speed Dial number corresponds to the number keys you press to speed dial one of that entry’s numbers.

Example: To speed dial the Contacts entry assigned to Speed Dial 5, press

and hold , (1-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 35, press

then press and hold , (2-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 235, press

, press , then press and hold , (3-touch dialing).

You can assign one or more Speed Dial numbers to a Contacts entry during new entry creation or by editing an existing entry.

Assignment During Entry Creation

To assign a Speed Call number to a new Contacts entry number, do the following:

1.Follow either of the New Contacts entry procedures (see “Adding a New Contacts Entry” on page 39) until you enter

a name for the entry.

2.After entering the Contacts entry name, do not press . Instead, highlight a number field.

3.Press the Options soft key. The following options appear in the display:

Set Speed Dial — Assign a speed dial number.

Set as default — Set the number the phone will dial when Contacts dialing, speed dialing, or voice dialing.

Wait — A hard pause (waits for input from you).

2-Sec Pause — A 2-second pause after which dialing resumes. (For more information, refer to “Add Pauses to Contacts Numbers” on page 41.)

Select Set Speed Dial. The Speed Dial screen appears in the

display.

4.Select an Unassigned Speed Dial number or enter an Unassigned Speed Dial number in the Go To field using the keypad.

Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911. These numbers are already assigned to Voicemail (001), to Information (411), to Customer Care (611), and to emergency use (911).

Understanding Your Contacts

44

Page 47
Image 47
Samsung GH68-22573A Speed Dial, Press again to save your changes to the existing entry, Assignment During Entry Creation