››Connect to a Wi-Fi AP using a Wi-Fi Protected

Setup (WPS)

Using WPS, you can connect to a secured network. To connect to a Wi-Fi AP with a WPS button,

1

2

3

4

5

In Idle mode, open the application list and select Settings

→Wi-Fi.

Select a network indicated as protected network available, and select the check box next to Show advanced options.

Select the WPS drop-down menu.

Select Push button → Connect.

Press a WPS button on the access point within 2 minutes.

To connect to Wi-Fi with a WPS PIN,

1 In Idle mode, open the application list and select Settings

→Wi-Fi.

2 Select a network indicated as protected network available, and select the check box next to Show advanced options.

3 Select the WPS drop-down menu.

4 Select PIN from access point or PIN from this device → Connect.

5 On the access point, press the WPS button or enter the PIN of your device.

Connectivity

99