Using the full automatic program mode
Using the Drive Mode
You can select the continuous shooting or
● If you set [Remaining Count] to [Continuous] from the [Custom2 |
MENU], the maximum |
view finder on half shutter. |
● The focus is adjusted each time the shutter is released while exposure |
metering timer is set (shutter release button is pressed halfway) if the |
focus mode is set to SAF (Single mode). |
● Focusing is continuously active when the focus mode is set to CAF |
1.Press the Fn button on your camera and then press the direction button (▲).
-The Drive Mode options screen appears.
-If the AF mode is not set to SEL, you can directly press the direction buttons (▲) to use the drive mode.
DRIVE
Single Frame Shooting | |
: Move | : Set |
(Continuous mode). |
● Note that in CAF (Continuous mode) / MF (Manual mode), the shutter |
will release when the shutter release button is pressed fully even if |
focusing is not complete. |
● The shutter cannot be released until charging is complete when using |
the |
● To take a picture while charging the |
Charging] to [On] in the [CUSTOM2 MENU]. |
2.Select the [() Continuous Shooting (Hi)] using the direction buttons (◄►) and then press the OK button.
DRIVE
Continuous Shooting (Hi) | |
: Move | : Set |
3.Continuous shooting starts as soon as you press and the hold the shutter button.