Using the best programmed exposure, P (Program) mode
P (Program) mode supports both Tv (Shutter Priority) and
Av (Aperture Priority) modes.
■To change the shutter speed
You can switch to Shutter Priority automatic exposure by turning the front dial (
) in P (Hyperprogram) mode.
- You can only set the shutter speed to a value
that is in relation to aperture.
- If the brightness changes and the aperture value is outside the relative range, the aperture will blink in the viewfinder and on the LCD panel.
■To change the aperture
You can switch to Aperture Priority automatic exposure by turning the rear dial (
) in P (Hyperprogram) mode.
-You can only set the aperture to a value that is in
relation to shutter speed.
- If the brightness changes and the shutter speed is outside the relative range, the shutter speed will blink in the viewfinder and on the LCD panel.
- Press the Green button () to return to Hyper- program automatic exposure.
●All the program modes have different uses of the front dial ( ) and
rear dial ( ) depending on the set values.
● When using the P (Program) mode, you can change the ISO sensitivity by using the front dial ( ) while pressing and hold the OK button.