Setting the Exposure
Selecting the Metering Method
Choose the part of the screen to use for measuring brightness and determining exposure.
Segment the screen in 16 parts, meter each portion and | ||
metering | determine the appropriate exposure. | |
|
| |
Measure the entire screen with an emphasis on the centre | ||
metering | and determine the exposure. | |
|
| |
Spot metering | Measure only the centre of the screen and determine | |
exposure. | ||
| ||
|
|
h Set with the metering mode lever.
The metering mode lever
The metering mode Indicator
Exposure Compensation
This allows you to deliberately over expose (brighten) or under expose (darken) your picture. You can adjust the EV Compensation from
1. Set the compensation with the front dial () while the button is pressed.
2. Confirm the compensation value in the viewfinder.
“+” or
Compensation value
●Exposure compensation is not available when the exposure mode is set
to (Auto mode), M (Manual), B (Bulb), and X (Flash synchro) mode.
● The exposure compensation is not cancelled by turning the camera off if you select the [EV Compensation] in the [Memory of Settings] of [CAPTURE MENU].
●The is set to 0 when button and greenbutton ()are pressed at the same time.