Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
Press the button on the bottom rear of the stand in order to lock down the stand.
Note : Always have your monitor faced front side down on a level surface (not resting on the stand) before locking it down. Pressing the button while the monitor stand is resting on a flat surface may cause your monitor to topple or fall and cause personal injury and/or damage to the unit.
Connect the power cord for your monitor to the power port on the back of the monitor.
SyncMaster 153B/173B
Unpacking
Front
Rear
(The configuration at the back of the monitor may vary from product to product.) 1. Power port
2. Signal port
3. Pin
Note: See Connecting the Monitor for further information regarding cable connections.
