Specifications for the Raven Cdma, Environmental | Airlink CDMA/1x

APPENDIX 1

Specifications for the Raven CDMA

Physical Characteristics:

•Weight: < 1 lb.

•Size: 3” x 1.1” x 5.1"

•RF Antenna Connector: 50 Ohm TNC

•Serial Interface: RS232 DB-9F with 1200-115200 bps

•Status LEDs

Data Services & RF Features: CDMA

•Full duplex transceiver

•Dual-band support for both 800 MHz cellular and 1.9 GHz PCS bands

•Dual band Receive Diversity

•Adheres to CDMA authentication as specified in CDMA2000 1X

•224 mW RF output (+23.5 dBm)

•Data rates up to 153.6 kbps (forward channel) and 76.8 kbps (reverse channel)

Environmental:

•Operating ranges: -30°C to +70°C

Raven CDMA User Guide for Verizon, version 2.23

48

Image 54

Airlink CDMA/1x manual Specifications for the Raven Cdma, Physical Characteristics, Data Services & RF Features Cdma

Contents

User Guide Raven Cdma User Guide for Verizon, version Contents AT Mode PassThru Mode PPP Mode Slip Mode UDP Pad Mode DNS Using Names Instead of IP addressesConfiguring Keepalive Data usage using Keepalive TCP PAD Mode Connecting the Antenna Connecting power Appendix 1 Specifications for the Raven CdmaRaven Snmp Configuration Snmp Overview What is RSSI? Why is the Rssi for my Raven negative? Appendix 4 Example of the MIB trapSupport web site Contacting Technical Support Introduction to Raven Cdma Cdma Overview Establishing a Internet Connection Using Cdma to Communicate with Your Equipment Common Uses for the Raven Financial Point of Sale and Kiosk Backup connection to the Internet Connecting the Raven to your computer Quick Start Guide and Setup WizardActivation of the Raven Setup Wizard Activating the Raven using AT Commands Raven Indicator Lights Raven Cdma User Guide for Verizon, version Utilities for the Raven AirLink Configuration Executive ACE Wireless ACE 3G AceNet AceView AceView About Modem Modem Doctor IP Manager Dynamic Name Resolution Fully Qualified Domain Name Configuring the Raven for Dynamic IP Wireless ACE Dynamic IP IP Manager configuration Restrictions for Modem Name DNS Using Names Instead of IP addresses Configuring DNS PPP-Peer Configuring Keepalive Keepalive Data usage using Keepalive Wireless ACE Keepalive Configuration Host Modes AT Mode PassThru Mode PPP Mode Slip ModeATDT10.0.0.1CR ATDT10001CR ATD#19788CR UDP Pad Mode UDP Auto Answer Reliable UDP TCP PAD Mode Multicast UDP Hybrid Modes TCP Auto Answer Hybrid Mode Settings Modbus/BSAP Configuration Modbus Overview Supervisory Control and Data Acquisition Scada TelemetryRemote Terminal Unit RTU Programmable Logic Controller PLC Modbus TCP/IP Raven Modbus on UDP Configuring the Raven at the Polling Host for Modbus on UDP Default Power-up ModePort IDs to IPs Dynamic IP Configuring the Remote Ravens for Modbus with Wireless ACE Modem Name and Domain Host Raven IP Dynamic IPs RTU settings Raven mounted in an enclosure with an RTU RTU to Raven setup Simple Network Management Protocol Snmp Snmp Overview Snmp Traps Raven Snmp ConfigurationManagement Information Base MIB Listening Port User Name and Password Security Level Wireless ACE Changing the Raven Password Menu Option Trap Destination Hardware Installation Connecting the Antenna Connecting power Connecting the Raven to a computer or other device Data Services & RF Features Cdma Specifications for the Raven CdmaPhysical Characteristics Environmental Power Management Power consumptionSerial Port Pin-outs Raven Cdma User Guide for Verizon, version Mounting Kit Raven Mounting Bracket, part number 100-170-1009 a Raven Cdma User Guide for Verizon, version AT Commands Using Wireless Ace Using Telnet Terminal Emulation Wireless ACE Using AT Commands StartAll ProgramsAccessoriesCommunicationsHyperTerminal HyperTerminal AT mode via Telnet Direct Serial Connection AT Command Tables HyperTerminal Comport Setting Information Commands Command Details Information and Status Raven Basic Commands Basic Commands common AT commandsNone Activation Activation Provisioning Cellular Network Cellular Network Verizon’s Cdma Local Network and Host Modes PassThru This command is not pro Ceeded by AT Local Network and Host Modes Databits = 7 or Itystop bits Parity = S23=speed,databits Speed =Paritystop bits Stopbits = Figured to ignore DTR. When Ignore DTR is enabled Slip Default Atdt N.n = subnet PPP Direct Communication When *CSX1=0 Telnet Direct Communication S53=methodd.d.d.d Method = PppppPort Yyyy,hhmmss Time and DateMm/dd/yyyy = Hhmmss = Fn=d.d.d.d Friends ModeFriends Mode DNSn=d.d.d.d Keepalive IP Manager If *DOMAIN=eairlink.com, then when Example if *MODEMNAME=mymodem Raven Cdma User Guide for Verizon, version Logging Modbus MLISTid=d.d.d.d Modbus SettingsCannot be configured in Wireless ACE D.d=IP or Low order 4 bits Snmp Simple Network Management Protocol D.d = IP or SMTP/SMS Number Smtp email and SMS messagingNumber= SMS Name= Flag=1 Index=0-9C3211 Flag=0 Flag=2 Other Other Settings Example of the MIB trap AIRLINK-MIB Definitions = Begin Imports Raven Cdma User Guide for Verizon, version Raven Cdma User Guide for Verizon, version Raven Cdma User Guide for Verizon, version Raven Cdma User Guide for Verizon, version Raven Cdma User Guide for Verizon, version Raven Cdma User Guide for Verizon, version END Raven Cdma User Guide for Verizon, version Frequently Asked Questions FAQ and Solutions What is RSSI? Why is the Rssi for my Raven negative? Dual-band What is the Proper RF Coverage for my Raven?What Type of Antenna is Best for my Raven? Dipole What do I need to power my Raven ? Can I use a portable battery to power my Raven ?Mounts 103 Public Mode *HOSTPRIVMODE=0 Private Mode *HOSTPRIVMODE=1 What is the COM1000? 105 Wireless ACE Wireless ACE Update PRL Wireless ACE Update PRL interface AT Commands 108 Support web site Contacting Technical Support