Airlink CDMA/1x manual Example if *MODEMNAME=mymodem

TABLE 14. IP Manager

Command	Parameters	Details
*IPMGRKEYn=[key]	n= 1 or 2	Sets the 128-bit key to use to authenticate the IP update
	key = 128-bit	notifications. If the key's value is all zeros, a default key
		will be used. If all the bytes in the key are set to FF, then
	key in hexadeci-
		no key will be used (i.e. the IP change notifications will
	mal [32 hex
		not be authenticated). AT*IPMGRKEY1 is used to set
	characters]
		the key to use with AT*IPMANAGER1, while
		AT*IPMGRKEY2 is used to the key with
		AT*IPMANAGER2.
*IPMGRUPDATEn=m	n= 1 or 2	Sets the number of minutes to periodically send an IP
	m=5-255	update notification to the corresponding server. This will
		occur even if the IP address of the Raven doesn't change.
		*IPMGRUPDATE1 is used to set the refresh rate to
		*IPMANAGER1, while *IPMGRUPDATE2 is used
		with *IPMANAGER2.
		If the value is set to 0, then periodic updates will not be
		issued (i.e. IP change notifications will only be sent
		when the IP actually changes).
*MODEMNAME=[name]	name = domain	Name of the Raven (up to 20 characters long) to use
	name (i.e. eair-	when performing IP change notifications to IPManager.
	link.com)	The value in *DOMAIN provides the domain zone to
		add to this name.
		Example: if *MODEMNAME=mymodem and
		*DOMAIN=eairlink.com, then the modem's fully qual-
		ified domain name is mymodem.eairlink.com.
		Note: Each modem using IPManager needs a unique
		name. Two modems cannot be called “mymodem”. One
		could be “mymodem1” with the other as “mymodem”.
		Automatically Generated Names:
		#I3 - The ESN/IMEI will be used as the name.
		#NETPHONE - The phone number be used as the
		name.
		Note: Only letters, numbers, hyphens, and periods can
		be used.

80 Raven CDMA User Guide for Verizon, version 2.23