Modbus/BSAP Configuration
FIGURE 4. Wireless ACE: MD Configuration
•ATMD13: Modbus ASCII
•ATMD23: Modbus RTU (Binary)
•ATMD33: BSAP
•ATMD63: Variable Modbus (individual parameters are set up manually)
IDs to IPs
The last step of configuring the Raven at the host is setting the IDs to their specific IPs. In Wireless ACE, select the menu option Addr List.
FIGURE 5. Wireless ACE: Addr List
Addresses can be entered in decimal or hex. Wireless ACE will translate hex entries into decimal. The number before the “=” is ID, the number after is the IP address. There can be a total of 100 remote ID/Local addresses entered into the Raven.
When using AT commands via telnet or direct serial connection, use ATMLIST for decimal IDs and ATMLISTX for hexidecimal, ex. if the ID is 27 and the IP is 123.123.123.124, you would enter it as ATMLIST27=123.123.123.124 or ATMLISTX1B=123.123.123.124.
Dynamic IP
If you do not have a static IP, the host Raven should be configured to report its cur- rent IP to a Dynamic DNS (DDNS) server (IP Manager: page 15).
36 | Raven CDMA User Guide for Verizon, version 2.23 |
