Airlink CDMA/1x manual Wireless ACE Update PRL interface, AT Commands

FIGURE 3. Wireless ACE: Update PRL interface

Generally the PRL will be updated to the one present in the “PRL” folder of the Wireless ACE installed folder (i.e. C:\Program Files\AirLink\Wireless Ace 3G\PRL). If the PRL version to apply is displayed as ONLINE, then the PRL will be updated Over-the-Air (OTA) directly from Verizon.

Attention : If you are using ONLINE updating, your Raven Air- Link modem needs to be able to contact Verizon’s your cellular provider’s network for the over-the-air process to be successful. You may need to move the modem or connect a different antenna to get a clear strong signal. If you are connected to your modem remotely, you may incur data charges for the update.

AT Commands

You can use AT commands to manually trigger an Over-the-Air PRL update.

1.Connect to the Raven direct serial communication (page 53).

2.Type AT\APASSTHRU and press Enter to put modem into Pass Thru Mode.

3.Wait at least 30 seconds to initialize the modem.

4.Type AT!STATUS and press Enter to check the network status:

Raven CDMA User Guide for Verizon, version 2.23 107