English - 131
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1Unplug the TV, then use a
screwdriver to remove the
screws.
2Remove the Lamp cover.
3Push the clip and pull down
the Lamp holder.
4Separate the Lamp from the
engine by holding the handle
and pulling it out.
NOTES
Be sure the replacement Lamp is the same type.
After replacing the lamp, align the lamp cover with the groove and secure the screws.
The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
BP68-00617A-00Eng(130~135) 8/11/06 4:26 PM Page 131