Samsung HL-54676S manual Memorizing the Channels, Selecting the Video Signal Source

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable

channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal Source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system).

1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.

Channel

Antenna	: Air	√
Auto Program		√
Channel Manager		√
Name		√
Fine Tune		√
Signal Strength		√
LNA	: On	√

Move Enter Return

2 Press the ENTER button to select “Antenna”.

Press the … or † button to select “Air” or “Cable”, then press the ENTER button.

3 Press the … or † button to select “Auto Program”, then press the ENTER button.

Continued...

Channel

Antenna	Air
	: Cable
Auto Program	Cable
Channel Manager
Name
Fine Tune
Signal Strength
LNA	: On
Move	Enter	Return

Channel

Antenna	: Air	√
Auto Program		√
Channel Manager		√
Name		√
Fine Tune		√
Signal Strength		√
LNA	: On	√
Move	Enter	Return

English - 33