About the battery

Battery Properties

A lithium-ion battery is small-sized and has a high capacity. Low ambient temperature (below 10Cº (50ºF)) may shorten its usage time and affect its function. Before recording in low temperatures, put the battery into your pocket to warm it, then install it in the camcorder.

Make sure to store the battery separately after use.

-A small amount of battery power is consumed when the battery is stored in the camcorder even if the camcorder power is off.

-The battery may be completely discharged, if it has been installed and left in the camcorder for a long period of time. If this occurs, the battery may not fully operate even if you charge it.

-If the battery is not used for a long time, fully charge the battery and then, using your camcorder, drain the charge completely once every 3 months to keep the battery functioning properly. To store the battery, remove it from your camcorder and put it in a cool, dry place.

Charge an extra battery before using the camcorder outdoors in cold temperatures.

-The cold temperature may shorten the length of time you can use the battery before needing to recharge it.

-Carry the supplied AC power adaptor to charge the battery while travelling.

Check whether the battery terminal is damaged if the battery falls or is dropped.

-If you install a battery with the damaged terminal into the camcorder, you can damage the camcorder.

Remove the battery and the memory card from the camcorder and disconnect the AC power adaptor after use.

-Store the battery in a stable, cool and dry place.

(Recommended temperature : 15Cº~ 25Cº (59ºF ~ 77ºF), recommended humidity: 40%~ 60%)

-Temperatures that are too high or too low shorten the battery lifetime.

-The battery terminals can become rusty or malfunction if the battery is stored in a smoky or dusty location.

Recyle or dispose of your dead batteries properly.

The battery lifetime is limited.

-Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace the battery with a new one.

-Each battery’s life is affected by storage, operating, and environmental conditions.

Make sure to turn off the camcorder before disconnecting the AC power adaptor. Otherwise, you can damage the storage media or data.

Use a nearby wall outlet when using the AC power adaptor. Disconnect the AC power adaptor from the wall outlet immediately if any malfunction occurs while using your camcorder.

Do not place the AC Adaptor in a confined space when you use it, such as between a wall and a piece of furniture.

• Be sure to use the included AC power adaptor to power the camcorder. Using other AC power adaptors could cause electric shock or result in fire.

You can use the AC power adaptor around the world. An AC plug adaptor is required in some foreign countries. If you need one, purchase it from your distributor.

The charging time will vary depending on the charge remaining in the battery.

The battery is charged over 95% after about 2 hours, and the indicator colour changes to green. It

takes about 2 hours and 40 minutes for the battery to charge 100%.

21

 

 

 

Page 27
Image 27
Samsung HMX-T10BP/EDC, HMX-T10WP/EDC, HMX-T10OP/EDC, HMX-T10WP/XEU, HMX-T10BP/MEA manual About the battery, Battery Properties

HMX-T10WP/XIL, HMX-T10WP/XTR, HMX-T10BP/XER, HMX-T10BP/MEA, HMX-T10OP/XER specifications

The Samsung HMX-T10WP/EDC and HMX-T10BP/EDC are compact camcorders designed to cater to the needs of both amateur and professional videographers. With their sleek design and advanced technological features, these models stand out in the crowded camcorder market.

One of the main features of the HMX-T10 series is its robust1080p full HD video recording capability. This allows users to capture clear and vibrant videos with exceptional detail. Additionally, the camcorders are equipped with a 10x optical zoom lens, offering versatility in shooting from different distances without sacrificing image quality. This optical zoom is complemented by a digital zoom, which further enhances the user’s ability to capture distant subjects.

The HMX-T10WP/EDC model comes with an added layer of durability, featuring a water-resistant design. This makes it suitable for outdoor adventures, allowing users to record their experiences without worrying about damage from splashes or rain. Its compact form factor ensures it is easily portable, making it an ideal companion for travel and on-the-go shooting.

Both models utilize Samsung’s advanced image stabilization technology, ensuring stable video footage even during movement. This is particularly beneficial for capturing dynamic scenes, as it mitigates the effects of camera shake. Furthermore, the built-in Smart Auto feature automatically selects the best settings for various shooting conditions, enhancing the overall user experience and ensuring high-quality results.

With a 3-inch touch display, navigating through menus and settings is straightforward and intuitive. This responsive interface allows for quick adjustments, making it easy for users to focus on their creativity rather than getting bogged down by complicated controls.

The HMX-T10BP/EDC offers extended recording capabilities with its high-capacity battery, allowing for longer shooting sessions without interruption. This feature is especially advantageous for events or outings where charging opportunities may be limited.

Both the HMX-T10WP/EDC and HMX-T10BP/EDC models highlight Samsung's commitment to providing cutting-edge technology and user-friendly features. These camcorders are ideal for anyone looking to capture memorable moments in high definition, whether it be family gatherings, travels, or special occasions. With a focus on quality, durability, and ease of use, Samsung continues to solidify its place in the consumer electronics market.