troubleshooting
Adjusting the image during recordingSymptom | Explanation/Solution | |
It is out of focus. | • This camcorder has no | |
• The minimum focal length between the camcorder and the subject is 1.3m. | ||
| ||
The image appears too bright or | • This occurs when recording images under a fluorescent lamp, sodium lamp, or mercury | |
flickering, or changes in colour. | lamp. Cancel "iSCENE" to minimise these phenomena. page 42 | |
| Playback on your camcorder |
| |
|
| |
Symptom | Explanation/Solution | |
Pressing the playback (play/pause) | • Press the Mode ( ) button to set the Play mode. | |
• Image files recorded on another camcorder may not play on your camcorder. | ||
button did not start playing. | ||
• Check out the memory card compatibility. page 28 | ||
| ||
The skip or search function does not | • If the temperature inside the camcorder is too high, it cannot function properly. | |
work properly. | Turn the camcorder off, wait for a few moments, and turn it on again. | |
Playback is interrupted unexpectedly. | • Check if the AC power adaptor is properly connected and stable. | |
You cannot hear sound when playing a | • The Time Lapse REC function does not support sound. | |
Time Lapse recording. | ||
| ||
Photos stored on a storage media are | • Photos recorded on other devices may not appear at actual size. | |
not displayed in the actual size. | This is not an error. | |
| Playback on other devices (TV, etc.) | ||
|
| |
Symptom | Explanation/Solution | |
| • Connect the audio of the component/AV to your camcorder or connected device (TV, | |
| HD recorder, etc). (Red colour- right, White colour- left) | |
You cannot view the image or hear the | • The component/AV cable is not connected properly. | |
Make sure that the connection cable is connected to the proper jack. pages | ||
sound on the connected device. | ||
• This camcorder provides the | ||
| ||
| component and the AV cable. Therefore, when using the component/AV cable, you must | |
| check the right method for the TV output by setting the "TV Out " menu. page 60 | |
The image does not appear on the TV. | • Set the video output signal according to the TV colour system of the connected TV. | |
page 60 | ||
| ||
The image appears distorted on TV or | • The display mode of the recorded video does not match that of playback device. | |
• A video recorded in 16:9 wide mode should be played back on a TV or PC that | ||
PC player. | ||
supports 16:9 screen mode. | ||
| ||
84_English