Example of Time Lapse REC

 

 

 

 

Total time for recording

 

 

 

Time Lapse REC records image frames at a predefined

 

 

 

 

 

 

 

 

 

Recording interval

 

 

interval to produce a time-lapse video.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timeline

Time Lapse REC is useful for filming in the following

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

situations:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Blooming flowers

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Clouds rolling by in the sky

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time for recording on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

storage media (a video

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

clip of Time Lapse REC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•This function is shut off after being used one time.

• 60 captured images compose a video of 1 second length. Since the minimum length of a video to be saved by your camcorder is one second, the interval defines how long the Time Lapse Recording should be set for. For example, if you set the interval to "30 Sec," Time Lapse Recording should be set for at least 30 minutes to record a minimum video length of 1 second (60 images).

•Once the Time Lapse REC finishes recording for its total recording time, it switches to standby mode.

•Press the Recording start/stop () button if you want to stop the Time Lapse REC.

•Audio is not recorded during Time Lapse Recording.

•When a video recording fills up 3.5GB of storage media, a new recording file is automatically started at that point.

•When the battery is discharged during Time Lapse REC, it saves the recording up to that point and switches to standby mode. After a while, it displays a warning message, then turns off automatically.

•When memory runs out while performing Time Lapse REC, the camcorder switches to standby mode after saving what was recorded so far.

•We recommend using the AC power adaptor when using the Time Lapse REC function.

•When a time lapse recording starts, the "Time Lapse Recording" message blinks on the screen and it appears that the screen has stopped. This is a normal operation; do not remove the power source or memory card from the camcorder.

•This camcorder is an NTSC-system-based camcorder for video encoding. But actual output depends upon user setting. ￿page 43

English_47