![](/images/new-backgrounds/1164288/16428873x1.webp)
Press the ▲ or ▼ button to memorize the channels of
3 the selected connection.
Press the ENTER button to select “Start”.
Notes
•If the antenna is connected to ANT 1(CABLE IN), select “CABLE” and if it is connected to
ANT 2(AIR IN), select “AIR”.
•If both ANT 1 and ANT 2 are connected, select the “Air + Cable”.
•If the CableCARD is inserted into the “CableCARD” slot on the rear panel, “Cable” and “Air+Cable” are not available.
When selecting Cable TV :
Press the ▲ or ▼ button to select “Cable”, then press the ENTER button.
Press the ▲ or ▼ button to select “STD”, “HRC”, or “IRC”, then press the ENTER button.
Plug & Play
Select the antennas to memorize.
Air |
| Start |
Cable |
| Start |
Air + Cable |
| Start |
Move | Enter | Skip |
Plug & Play
Select the cable system.
STD
HRC
IRC
Move
Enter
Skip
The TV will begin memorizing all of the available
4 channels. After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
“Set to daylight savings time.” menu is automatically displayed.
Press the ENTER button. Press the ▲ or ▼ button to
5 select “Yes” or “No”, then the ENTER button. “Select your time zone in which you live” menu is automatically displayed.
Plug & Play
Channel Memory in Process.
AIR Channel 67
Stop
Enter
Skip
Plug & Play
Stop.
7 Channels were memorized. Air : 9.
OK
Enter
Skip
Plug & Play
Set to daylight savings time.
Daylight Savings Time | : EnglishNo | |
|
| Yes |
Move | Enter | Skip |
37