SPEAKER SETUP
Setting the speaker size
Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not.
1. | Press SETUP/MENU button. | | |
| ~ “INPUT” appears on the display. |
| |
2. | Press ▲▼ button to select “SPEAKER”, and then press the |
| |
3. | ENTER. | | |
Press ▲▼ button to select “SPK SIZE”, and then press the |
| ||
|
| ||
|
| ||
| ENTER or ▶ button. |
|
|
4. | Press ◀▶ button to select the speaker you want. |
|
|
| | ||
| ~ Each time you press this button, FRONTCEN SURR |
S.BACK S.W CROVR will be selected in turn.
5. Press ▲▼ button to set the mode (LARGE, SMALL etc.) for the selected speaker.
6.Repeat steps
- To exit setup mode -
~Press SETUP/MENU, EXIT or RETURN button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER | Possible Settings | Default Setting |
|
|
|
FRONT(Front) | LARGE, SMALL | SMALL |
|
|
|
CEN(Center) | LARGE, SMALL, NONE | SMALL |
|
|
|
SURR(Surround) | LARGE, SMALL, NONE | SMALL |
|
|
|
S.BACK (Surround Back) | LARGE, SMALL, NONE | SMALL |
|
|
|
SUB(Subwoofer) | ON, OFF | ON |
|
|
|
CROVR (Crossover Frequency) | 60, 80, 100,120, 150, 180, 200(Hz) | 150Hz |
|
|
|
~ LARGE : Select when using large speakers. You can listen to full | range sound. |
~SMALL : Select this when using small speakers
~NONE : Select when no speaker is used
~ON (subwoofer) : Select when using the subwoofer speaker.
~OFF (subwoofer) : Select when not using the subwoofer speaker.
~CROVR : Select the crossover frequency for the best bass response in your room.
GnE
●upets
33