SURROUND SETUP (Continued)
Setting EX/ES mode
When surround back speakers are connected, you can listen to 6.1 or 7.1
1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode.
2. | Press ▲▼ button to select "SURROUND", and then press the |
| |
| |||
| ENTER. | ||
3. | Press ▲▼ button to select the “EX / ES”, and then press the |
| |
| ENTER or ▶ button. |
| |
| ~ “EX/ES : AUTO” appears on the display. |
| |
4. | | ||
Press ▲▼ button to set the EX/ES you want. | |||
| |||
| ~ AUTO : If the unit receives an audio signal that it can |
| |
| recognize, it will select an optimal decoder for playback in |
| |
| | ||
| 6.1/7.1 channel. | ||
| If the amplifier does not recognize the audio signal, it will not |
| |
| play in 6.1/7.1 channel automatically. |
| |
|
|
|
~ON : Dolby Digital or DTS signal will be played in 6.1 / 7.1 channel using Dolby Digital Surround EX / DTS ES decoder.
~OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.
-To exit setup mode-
~Press SETUP/MENU, EXIT or RETURN button.
“SETUP OFF” appears on the display and Setup Mode is exited.
Dolby Digital - EX
Movie soundtracks encoded with Dolby Digital EX will play audio over the surround back channels also.
A surround back channel is added to the DTS 5.1 channel system, improving the sense of sound directionality and space.
A
M ` You cannot use
`If the input source is in DTS 96/24, you will hear only 5.1 CH sound even if you have set EX/ES to On.
40