Samsung HT-AS730ST user manual Setting the test tone,   

SPEAKER SETUP (Continued)

Setting the test tone

Use the test tone to check the speaker connection status or level.

1.Press SETUP/MENU button.

~“INPUT” appears on the display and goes into Setup Mode.

2.Press ▲▼ button to select "SPEAKER", and then press the

ENTER.

3.Press ▲▼ button to select "TEST TONE", and then press the ENTER or ▶ button.

4.Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button.

~AUTO : Test signal will be automatically output as follows; F.L  CEN  S.W F.R  S.R  SBR  SBL  S.L.

-During test tone output, press ▲▼ button to adjust the speaker output level from -10 to +10 dB by 1 step.







~MANU (MANUAL): Enables you to adjust the output level of the speaker manually.

1)Press ◀▶ button to select the speaker you want.

Each time you press ◀▶ button, F.L  CEN  S.W F.R  S.R  SBR  SBL  S.L will be selected in turn.

2)Press ▲▼ button to set the test tone as you want.

You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB.

Test Tone Output
• F.L (front left) : -10 ~ +10dB	• S.R (surround right) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB	• SBR (surround back right) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB	• SBL (surround back left) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB	• S L (surround left) : -10 ~ +10dB

- To stop test tone -

~Press SETUP/MENU or EXIT button once time. “SETUP OFF” appears on the display and test tone stops.

36