Symptom | Check | Remedy |
|
|
|
There is no sound from | • Are the surround back speakers | • Refer to pages 14 ~16 to connect it |
surround back speakers | connected properly? | properly. |
| • Is the S.BACK(Surround Back) selected | • Refer to page 33 to select LARGE or |
| to NONE in Speaker Setup? | SMALL. |
| • Is Surround Mode set to EX/ES? | • Refer to page 40 to set Surround Mode |
|
| to EX/ES. |
|
|
|
Can't select EX/ES mode. | • Is S.BACK(Surround Back) selected to | • Refer to page 33 to select LARGE or |
| NONE in Speaker Setup? | SMALL. |
| • Is the input signal selected properly? | • Use 7.1 channel external component. |
|
|
|
Can't select Dolby Pro Logic | • Is the input signal selected properly? | • Select 2 channel Dolby Digital, PCM, |
llx mode. |
| and Analog input signal. |
|
|
|
Can't select NEO:6 mode. | • Is the input signal selected properly? | • Use PCM and Analog input signal. |
|
|
|
There is no sound when | • Is Digital input selected? | • Check whether the DVD player is |
playing a DTS encoded DVD. |
| properly connected and refer to page |
|
| 46 to select the digital input. |
|
|
|
Product protection function
Heat protection
• The protection function will come on if the main unit or power transformer overheats.
"" will appear in the display .
This function will come on :
-If speaker terminal is shorted
-If speaker cable is shorted
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will disappear on the display and the unit will work properly.
M ` If PROTECTION appears on the display, check whether the speaker terminal is shorted and then turn on the unit
60
