4.The phone’s LCD screen displays “WAIT LOGON”. Later, a ready screen displays the date, time and current network mode.
If your LCD screen displays different information from the above, more information may need to be entered. Please refer to the next section. If your phone registers into your IP telephony Server, it is ready to use. If not, continue to read for more configuration information.
2.2Network Settings
DHCP is supported by default. This allows the phone to receive an IP address and other
2.2.1PPPoE Mode
1.Press the 3 key for three seconds.
2.Press ENTER to confirm.
3.Press OK. The LCD will display “INPUT PASSWORD”.
4.Input the password (default value is 123).
5.Press ENTER. The LCD will display “NETWORK”.
6.Press ENTER. The LCD will display “WAN”.
7.Press UP ARROW.
8.Press ENTER. The LCD will display “STATIC NET”.
9.Press UP ARROW.
10.Press ENTER. The LCD will display “USER NAME”.
11.Press ENTER.
12.Press LEFT ARROW.
13.Enter your PPPoE account number. Use LEFT ARROW to delete if necessary.
14.Press ENTER. The LCD will display the PPPoE account number.
15.Press EXIT to return to the previous menu.
16.Press UP ARROW. The LCD will display “PASSWORD”.
17.Press ENTER.
18.Press LEFT ARROW.
19.Enter your PPPoE password. Use LEFT ARROW to delete if necessary.
20.Press ENTER. The LCD will display the password.
21.Press EXIT four times.
22.Press DOWN ARROW until the LCD displays “SYSTEM”.
23.Press ENTER. The LCD will display “SAVE”.
24.Press ENTER. The LCD will display “ARE YOU SURE”.
25.Press ENTER. The LCD will display “SAVING NOW” and then display “SAVE”.
26.Press EXIT twice.
27.Press and hold 3 until the LCD displays “ARE YOU SURE”.
28.Press ENTER. The LCD will display “CHANGING”. This means the phone is trying
-8 -
