Subscribe For MWI | If enabled, the phone will send Message Waiting Indication | ||
| (MWI) Subscribe message to the SIP Server |
| |
|
| ||
MWI Number | Specify the number to call to retrieve Voice Messages. | ||
|
|
| |
Subscribe Period | Time interval between MWI Subscribe Messages. |
| |
|
|
| |
Conference Type | Choose Conference Type, either local or network |
| |
|
|
| |
Conference Number | Number to dial to access network conference server. | Not needed | |
| if Local conference mode is chosen |
| |
|
|
| |
Registration Expires | SIP | If the server | |
| requests a different time, the phone will change to that value. | ||
|
| ||
Enable Service Code | Enables or disables the services described below. These codes | ||
| will be sent to the SIP server to activate or deactivate the service. | ||
|
| ||
DND On Code | Do Not Disturb (DND) – When this hot key is pressed, all calls to | ||
| the extension to be rejected by the server. The incoming call | ||
| record will not be displayed in the Call History. |
| |
|
|
| |
DND Off Code | Disable Server DND as described above. |
| |
|
| ||
Always CFwd On Code | Always Call Forward On – When this function is enabled, the | ||
| server will forward all calls to a designated number. The | ||
| incoming call record will not be displayed in the Call History. | ||
|
|
| |
Always CFwd Off Code | Disable Server Always CFwd as described above. |
| |
|
| ||
Busy CFwd On Code | Busy Call Forward On - When this function is enabled, the server | ||
| will forward all calls to a designated number if the telephone is | ||
| busy. The call record will not be displayed in Call History. | ||
|
|
| |
Busy CFwd Off Code | Disable Server Busy CFwd as described above. |
| |
|
| ||
No Ans. CFwd On Code | No Answer Call Forward On - When this function is enabled, the | ||
| server will forward all calls to a designated number if there is no | ||
| answer within a designated time. The incoming call record will not | ||
| be displayed in the Call History. |
| |
|
|
| |
No Ans. CFwd Off Code | Disable Server No Ans. CFwd as described above. |
| |
|
| ||
Anonymous On Code | Anonymous On – When this function is enabled, the server will | ||
| allow the phone to make anonymous calls. In other words | ||
| “Anonymous” will be transmitted for Caller ID. |
| |
|
| ||
Anonymous Off Code | Disable Anonymous Calling function described above. | ||
|
| ||
Keep Alive Type | Specifies the NAT keep alive type. If OPTION is selected, the | ||
| phone will send OPTION sip messages to the server every NAT | ||
| Keep Alive Period. The server will then respond with 200 OK. | ||
| If UDP is selected, the phone will send a UDP message to the | ||
| server every NAT Keep Alive Period. |
| |
|
| ||
Keep Alive Interval | Set the NAT Keep Alive Interval. Default is 60 seconds | ||
|
|
| |
User Agent | Set SIP User Agent value. |
| |
|
|
| |
DTMF Type | DTMF sending mode. There are four modes: |
| |
| |
| |
| | RFC2833 |
|
| | SIP_INFO |
|
| | AUTO |
|
|
|
|
|
|
| - 27 - |
|
Page 27
Image 27
