3.Connect the upper Speaker to the assembled Stand.
4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.
5.This is the appearance after the speaker is installed. Follow this steps to install other speaker.
Connecting The Speakers
3
Speaker
Stand
5
4
02 Connections
1.Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal
3.Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks. | Black |
|
|
| Red |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connecting the wall mount
1.Connect the speaker cord with the colour tube to (+), and the speaker cord without the colour tube to
2.Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
3.Fasten the screws to the wall, then hang the speaker on the wall.
Colour tube
Front left speaker (L) : White
Front right speaker (R) : Red
Center speaker : Green
Surround left speaker (L) : Blue
Surround right speaker (R) : Gray
| 5 mm |
| 4 mm |
30 mm | 10 mm |
| |
| Hole on the back of the speaker |
